Tighten The Adjuster Bolts Fixed Temporarily In Step; User's Guide - Epson ELPMB29 Bedienungsanleitung

(2) Secure the projector with M8 x 35 mm hexagon socket head cap bolts (x2).
f

Tighten the adjuster bolts fixed temporarily in step

Tighten the three adjuster bolts with equal force.
Warning
Tighten all screws firmly. Otherwise, the projector or this product may fall and cause personal
injury or an accident.
 When you have completed the projector installation, connect the necessary cables. Use
the cutout on the base frame unit so that the cables do not stick out.
 For adjusting the image and more details on the projector, refer to the User's Guide
supplied with the projector.
 Make sure the table does not wobble after you have installed the projector.
12
M8 x 35 mm hexagon socket head
cap bolts
c