Epson ELPMB29 Bedienungsanleitung Seite 8

b
Assemble the parts
(1) Mount the attachment plate on the projector using M4 x 12 mm hexagon socket head cap
bolts (4 bolts with washer and spring washer).
(2) Mount the tray on the base frame unit using an M4 x 8 mm hexagon socket head cap bolt.
You can mount the tray on either the left or right side of the base frame unit.
If you are using EB-485Wi/EB-480i/EB-475Wi/BrightLink 485Wi/BrightLink 485Wi+/BrightLink
475Wi/BrightLink 475Wi+, you can place the pen tray supplied with the projector on the tray.
If you do not have a pen tray, you can put the remote control, for example, on the tray.
Caution
Do not put the Easy Interactive Pen directly on the tray. The Easy Interactive Pen may not work
if it becomes damaged or soiled.
8
Attachment plate
M4 x 12 mm hexagon socket head
cap bolts (with washer and spring
washer)
Tray
M4 x 8 mm hexagon socket head
cap bolt