Epson ELPMB29 Bedienungsanleitung Seite 4

2. Specifications
Item
Mass
Maximum load capacity
Forward/backward adjustment
range of the adjuster bolt
3. Table to Install This Product
Install this product on a table that meets the following conditions.
 The tabletop is strong enough to support the weight of this product.
 The table is stable enough not to collapse after installation of this product (legs are not pointing inwards
or collapsible, for example.).
 The table is strong enough to take the weight of the projector and this product.
 The table surface is a light color such as white.
 The tabletop is 15 to 80 mm (0.6 to 3.1") thick.
 The tabletop is larger than the following minimum necessary size.
See the projection distance table in step a for the image size.
EB-485Wi/485W/475Wi/475W
BrightLink 485Wi/BrightLink 485Wi+/BrightLink 475Wi/BrightLink 475Wi+
Image Size
65 (1651)
60 (1524)
EB-480i/480/470
BrightLink 480i
Image Size
60 (1524)
56 (1422)
Specification
Approx. 7.5 kg
6.5 kg
80 mm (3.1")
Rectangular Table
48.0 x 55.8
(1220 x 1417)
44.9 x 52.0
(1140 x 1321)
Rectangular Table
48.4 x 48.7
(1230 x 1238)
45.7 x 45.6
(1160 x 1158)
4
Remark
Distance between the edge of the table and the center of
the bolt: 35 to 115 mm (1.4 to 4.5")
Round Table (Diameter)
80.0 (2032)
75.0 (1905)
Round Table (Diameter)
70.0 (1778)
65.0 (1651)
[Unit: inch (mm)]
[Unit: inch (mm)]