Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Alarms
Display
Flashing word "Mem"
Led Red On
I.e.
100L/h
Mem
Flashing "P1.0%". Led Red On.
I.e.
100L/h
Mem
Fixed alarm LED
Flashing word "Lev"
Man
I.e.
Lev
Fixed alarm LED
Flashing words "Lev" and "stop"
Man
I.e.
Lev
Stop
Flashing word "Mem"
I.e.
1:n
Mem
Flashing word "Mem"
I.e.
1:n
M
Mem
Fixed alarm LED
Flashing word "Flw"
Man
F
I.e.
Flw
I.e.
Parameter Error
PROG to default
EM00136424
If the pump gives a number of
strokes bigger that the maximum
number of strokes per minute it can
manage.
P1.0%
If the pump is not able to manage
the percentage set in programming.
The pump is dosing on maximum
P1.0%
frequency.
End
interrupting pump operation
P100%
End of level alarm, with interruption
to pump operation
P100%
The pump receives one or more
pulses during dosage with memory
6
function on Off
The pump receives one or more
pulses during dosage with memory
6
function on On
Active flow alarm. The pump has
not
received
number of signals from the flow
P100%
sensor.
In Batch mode only: If Recovery
mode has been enabled, the F will
flash and the alarm will indicate that
the pump's flow sensor has not
detected the set maximum number
of signals.
Internal CPU communication error.
Cause
of
level
alarm,
without
the
programmed
rev. 1.0
EN
Interruption
Press the
key to reset the
Alarm.
When
the
percentage
managed.
Restore the liquid level.
Restore the liquid level.
Press the
key
When the pump finishes receiving
external impulses, it returns the
memorized strokes
Press the
key
Press the
key to restore the
default parameters.
can
be
13
Werbung
Inhaltsverzeichnis
