Paragraph 17 – Flow Display Unit
Programming
Paragraph 18 - Setting the Pause
Programming
PROG
Configuration
+
Paus
N.Open
-
Display contrast adjustment.
For adjusting the display contrast keep the key
increase or decrease the contrast.
EM00136424
This makes it possible to set the dosage unit of
measurement on the display.
Changes can be made by pressing the
the
between
(milliliters/minute) or standard (% or frequency, depending
on settings). Press
menu
The pump can be paused by remote input.
The factory setting is Normally Open.
Changes can be made by pressing the
-
+
-
using the
N. CLOSED).
Press
pressed and within 5 seconds press the keys
rev. 1.0
keys to set the unit of measurement, choosing
L/h
(liters/hour),
to confirm and return to the main
Operation
keys to set the new value ( N. OPEN or
to confirm and return to the main menu.
EN
Operation
key, then using
Gph
(Gallons/hour),
key, then
or
ml/m
to
12