NVIP-4C-6500/F - User's manual (short form) ver 1.0
2.2 Mounting lens assembly
1. Set screw Ring focusing lens (Back focus)
2. Ring focusing lens (Back focus)
3. The interface to control the iris of the lens and its polarization
Lens Mount:
1. Remove the protecting element.
2. Attach the C/CS lens adapter if necessary.
3. Attach the lens to the camera by turning it clockwise.
4. Plug in the interface to control the iris of the lens.
5. Plug in other necessary wires.
6. Unscrew set screw, adjust "Back Focus" if necessary and screw counter screw.
Information:
To mount C type lens you should use additional C/CS adapter (not included)
C-mount lens
CS-mount lens
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
START-UP AND INITIAL IP CAMERA CONFIGURATION
1
2
3
C/CS adapter
Back focus ring
Set screw
9