Camera Mounting - Novus NVIP-4C-6500/F Benutzerhandbuch

NVIP-4C-6500/F - User's manual (short form) ver 1.0
START-UP AND INITIAL CAMERA CONFIGURATION

2.3. Camera mounting

To mount a camera please follow the instructions below:
•
Mount the bracket to the wall.
•
Mount the camera to the bracket.
•
If necessary, mount microSD card in the socket.
•
Connect the camera wires,
•
Adjust camera position.
•
Adjust the final zoom and focus of the lens.
CAUTION!
Please note that the wall or ceiling must have enough strength to carry the IP Camera.
Camera can be supplied using external power supply unit corresponding with the camera parameters or
by using RJ45 network socket and PoE (802.3af) power supply unit. If you're using external power
supply pleas connect wires according to polarisation shown on picture:
Information:
Power supply adapter is not included. Please use power adapter with parameters specified in user's
manual.
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
10