5. ELECTRIC CONNECTORS AND ACCESORIES
5.1. MicroSD card installation
Camera supports microSD cards up to a maximum size of 128GB. In order to install the card
properly, please follow the instructions below:
• Turn off the camera power.
• Mount microSD card in the socket (1).
• Turn on the camera.
• Check the microSD card by checking its capacity in the "System" -> "SD Card" tab.
5.2. Alarm input and output connection
Standard alarm input connection
Alarm In
(1/2)
IP Camera
Alarm In
(GND1/
GND2)
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
NVIP-4C-6500/F - User's manual (short form) ver 1.0
ELECTRIC CONNECTORS AND ACCESORIES
Switch
or detector
Standard alarm output connection
IP Camera
17
1
Signaling
Alarm Out
(1A/2A)
+
+
Signaling
Alarm Out
(1B/2B)
-
-
PSU