Start-Up And Initial Ip Camera Configuration; Description Of Connectors And Control Tools - Novus NVIP-4C-6500/F Benutzerhandbuch

NVIP-4C-6500/F - User's manual (short form) ver 1.0

START-UP AND INITIAL IP CAMERA CONFIGURATION

2. START-UP AND INITIAL IP CAMERA CONFIGURATION
CAUTION!
If the device was brought from a location with lower temperature, please wait until it reaches
the temperature of location it is currently in. Turning the device on immediately after bringing it
from a location with lower ambient temperature is forbidden, as the condensing water vapour
may cause short-circuits and damage the device as a result.
CAUTION!
In order to provide protection against voltage surges/lightning strikes, usage of appropriate
surge protectors is advised. Any damages resulting from surges are not eligible for service
repairs

2.1 Description of connectors and control tools

1. Power supply 12VDC / 24 VAC
2. Power indicator LED
3. RS-485 terminal block
4. Alarm Out terminal block
5. Alarm In terminal block
6. BNC CVBS video output
7. MicroSD card slot
8. Reset button
9. Audio output (Jack 3.5mm)
10.Audio input (Jack 3.5mm)
11.100 Mb/s Ethernet port (PoE RJ-45 connector)
12.Ground
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
1 2
3
12 11
10
4 5
8
9
8
6
7