WARNING
Improper operation
Death, serious injury or material
damage
•
Use product only for the
intended purpose.
•
Perform operation steps
according to this manual.
•
Do not make any product
modifications without authori-
zation.
WARNING
Carrying metal objects on the
body
Serious injury or material damage
•
Before working on the machine,
remove jewellery and other
metal objects from your hands
and arms.
•
All work steps must be
performed only by trained
personnel.
WARNING
Tool and workpiece not aligned
Serious injury or material damage
•
Align the upper and lower tools
parallel or at right angles to one
another.
•
Align tool and workpiece evenly
to one another.
•
Remove any unevenness from
the contact surfaces of the
upper and lower tool.
WARNING
Defective safety system
Death, serious injury or material
damage
•
Test safety system before
working on the machine.
•
If the safety system is defective,
block the machine immediately
and secure it against use.
ATTENTION
Switch off during operation
Machine damage and increased
reject production.
•
Finish pressing-in process
before switching off the
machine.
•
Only use the Switch Emergency
Stop in an emergency.
If the ambient temperature is
below 15 °C, the machine must be
switched on to preheat at least 10
minutes before starting work.
4 .1 SWITCH ON THE MACHINE
Precondition:
•
The power plug is connected.
•
The machine is not blocked due to a malfunc-
tion.
•
The switch emergency stop is deactivated.
1. Set Main Switch to ON.
2. Press Switch On.
The lamp behind the Switch On is green.
»
The machine is ready for operation.
»
4 .2 SWITCH OFF THE MACHINE
ATTENTION
Switch off during operation
Machine damage and increased
reject production.
•
Finish pressing-in process
before switching off the
machine.
Precondition:
•
The pressing-in process if finished.
1. Set Main Switch to OFF.
The power supply is disconnected and the
»
machine is switched off.
The lamp behind the Switch On goes out.
»
4 .3 SWITCH OFF THE MACHINE IN AN
EMERGENCY
ATTENTION
Switch off during operation
Machine damage and increased
reject production.
•
Only use the Switch Emergency
Stop in an emergency.
Precondition:
•
There is an emergency.
1. Use the Switch Emergency Stop.
The power supply is disconnected and the
»
machine is switched off.
The lamp behind the Switch On goes out.
»
English | 51