General; Introduction; Used Symbols; Conventions Of Depiction - honsel S-416 Plus Bedienungsanleitung

1 General

1 .1 INTRODUCTION

This manual contains important information and
should be stored near the machine. Read and
observe this operation manual before working on
the machine.

1 .2 USED SYMBOLS

DANGER
This safety instruction indicates
a hazardous situation that, if
not avoided, will result in minor,
moderate or serious injury or death.
WARNING
This safety instruction indicates
a hazardous situation that, if not
avoided, could result in minor,
moderate or serious injury or death.
CAUTION
This safety instruction indicates
a hazardous situation that, if not
avoided, could result in minor or
moderate injury.
DANGER
Danger to life due to electric
current. This safety instruction
indicates a hazardous situation that,
if not avoided, will result in minor,
moderate or serious injury or death.
ATTENTION
Failure to observe this information
may result in material damage or
environmental damage.
Useful information and hints

1 .3 CONVENTIONS OF DEPICTION

• List or action steps without a specified order
1. Action steps in a specified order
Direct effect of an action step
»
Text Operating element or display text within an
action step
34 | English

1 .4 GENERAL SAFETY INSTRUCTIONS

DANGER
Voltage-regulated devices
Death or serious injury caused by
electrical shock
• Switch off voltage supply if the
wires have damaged isolation.
• Work on the electric system
must be performed only by
qualified electricians.
• Keep moisture away from live
parts.
• Keep system closed.
• Do not bypass or disable fuses.
WARNING
Non-observance of general rules
and regulations
Serious injury or material damage
• Observe all national and
regional rules and regulations.
• Observe all rules and regu-
lations specified for the work
area.
• Observe all instructions placed
on the product components or
described in related documen-
tation.
WARNING
Improper operation
Death, serious injury or material
damage
• Use product only for the
intended purpose.
• Perform operation steps
according to this manual.
• Do not make any product
modifications without authori-
zation.
WARNING
Unqualified personnel
Serious injury or material damage
• Keep unqualified personnel
away from operation area.
• All operation must be performed
only by qualified personnel.