Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 37
various models; some details may differ ac-
cording to the machine model.
K15
Never touch or start the machine
with wet hands or bare feet;
K16
Remove the casings and the doors of
the electric boards only once the machine
has been stopped and de-energised;
For fire-prevention purposes:
K18
Keep all inflammable or combustible
products away from the equipment area.
K19
Obviously,
instructions are not sufficient to prevent all
sorts of accidents; therefore, the user will
have to be cautious.
K20 The machine must not be modified or
changed in any way without the builder's
written authorisation.
WARNING: We recommend the use of de-
mineralized water.
WARNING: Never use the power cable or
the gun cable to move it.
> SAFETY DEVICE
WARNING: the gun is fitted with a safety
catch. Whenever use of the machine is
interrupted it is important to operate the
safety catch to prevent accidental activation
of the jet.
Safety features:
- Safety valve
- Manostat
- Thermostat
- Pump with a by-pass valve or stopping device.
> STABILITY
WARNING:
The machine must be always kept
on horizontal bases, in a safe and stable way.
> WATER SUPPLY
the
above-mentioned
Water supply from the water main
- Connect a supply hose (not included) to
the water inlet of the unit and to the water
supply.
- Open the water supply.
WARNING: (symbol) machine not
suitable for connection to the potable water
mains.
The cleaner can only be connected to the wa-
ter mains if the water mains is separated by a
backflow preventer. Make sure that the hose
is at least Ø 13mm-1/2 inch and that it is rein-
forced.
WARNING: Water that has flown through
backflow preventers is considered to be
nonpotable.
IMPORTANT: Only clean or filtered water
should be used for intake. The delivery of
the water intake tap should be equal to the
double of the maximum pump range.
- Maximum intake water temperature: 40°C
- Max inlet water pressure: 1Mpa
Place the machine as close to the water supply
system as possible.
Failure to comply with the above conditions
causes serious mechanical damage to the
pump and the loss of warranty cover.
Water supply from the water tank build-in
- Switch off the unit.
WARNING: We recommend the use of de-
mineralized water.
> ELECTRICITY SUPPLY
- The appliance's electrical connection must
19
EN

Werbung

Inhaltsverzeichnis
loading

Verwandte Produkte für Comet DSG-6 DP

Inhaltsverzeichnis