50-Disc Multi-Cd Player; Repeating Play - Pioneer KEH-P4023R Bedienungsanleitung

Multi-CD Player
1 Press to select the multi-CD
SOURCE
player.
2 Use to adjust the sound level.
VOLUME
When you press
VOLUME
raised and when pressed down/–, the volume is
lowered.
3 Select a disc you want to listen to with the
to buttons.
1 6
For discs located at 1 to 6, press the correspond-
ing number button.
If you want to select a disc located at 7 to 12,
press and hold the corresponding numbers
such as for disc 7, until the disc number
1
appears in the display.
• You can also sequentially select a disc by
pressing 5/∞.
4 To perform fast forward or reverse, press
and hold 2 or 3 .
5 To skip back or forward to another track,
press 2 or 3 .
Pressing 3 skips to the start of the next track.
Pressing 2 once skips to the start of the current
track. Pressing again will skip to the previous
track.
Notes
• When the multi-CD player performs the
preparatory operations,
• If the multi-CD player does not operate prop-
erly, an error message such as
be displayed. Refer to the multi-CD player
owner's manual.
• If there are no discs in the multi-CD player
magazine, is displayed.
NO DISC
up/+, the volume is
is displayed.
READY
may
ERROR-14

50-disc multi-CD player

Only those functions described in this manual
are supported for 50-disc multi-CD players.

Repeating play

There are three repeat play ranges for the multi-
CD player: Multi-CD player repeat, one-track
repeat, and disc repeat.
Press
REPEAT/RANDOM
range.
Press
REPEAT/RANDOM
repeat range appears in the display.
•
Nothing's displayed
the multi-CD player
• — Repeat just the current track
RPT
• — Repeat the current disc
DISC
Notes
• If you select other discs during repeat play,
the repeat play range changes to multi-CD
player repeat.
• If you perform track search or fast
forward/reverse during
repeat), the repeat play range changes to
(disc repeat).
DISC
to select the repeat
until the desired
— Repeat all discs in
(one-track
RPT
En
14