Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GridVis® software - device configuration
GridVis® software - device configuration
5
5
Basic settings
Basic settings
1. Right-click to open the context menu for your
1. Right-click to open the context menu for your
device:
device:
- In the "Projects" > "Your project" > "Devic-
- In the "Projects" > "Your project" > "Devic-
es" > "By device type" > "UMG 96-PA" >
es" > "By device type" > "UMG 96-PA" >
"Device x" window.
"Device x" window.
7. The "New file" window is displayed.
7. The "New file" window is displayed.
8. In the category "UMG 96 Series", select the
8. In the category "UMG 96 Series", select the
"File types" UMG 96-PA (or your UMG 96
"File types" UMG 96-PA (or your UMG 96
from the PQ series).
from the PQ series).
2. Click the "Configuration" menu item in the
2. Click the "Configuration" menu item in the
context menu.
context menu.
3. The "Configuration [Device x]" window is
3. The "Configuration [Device x]" window is
displayed in the righthalf of the work area.
displayed in the righthalf of the work area.
9. Click "Next".
9. Click "Next".
6
GridVis® software - recording settings
GridVis® software - recording settings
6
In "Recording configuration", you can check and
In "Recording configuration", you can check and
configure which recordings the measurement
configure which recordings the measurement
device should save if required.
device should save if required.
A record holds a measured value or the mean
A record holds a measured value or the mean
value of the measured value.
value of the measured value.
10. The "Configure connection" step is displayed
10. The "Configure connection" step is displayed
in the window.
in the window.
4. Enter your individual device name in the
4. Enter your individual device name in the
„Name" input field in the "Identity" menu in the
„Name" input field in the "Identity" menu in the
"Configuration" window.
"Configuration" window.
11. Important settings in "Configure connection":
11. Important settings in "Configure connection":
- In the selection list, select the "Ethernet gate-
- In the selection list, select the "Ethernet gate-
way (e.g. for devices on the RS485)" connec-
way (e.g. for devices on the RS485)" connec-
tion type.
tion type.
- Enter the IP address of your UMG 604 in the
- Enter the IP address of your UMG 604 in the
"Address" input field (read out parameter
"Address" input field (read out parameter
addresses 300 to 303 on the device).
addresses 300 to 303 on the device).
- In the "Device address" selection field, select
- In the "Device address" selection field, select
the device address of your UMG 96-PA or
the device address of your UMG 96-PA or
your UMG 96 of the PQ series (see user man-
your UMG 96 of the PQ series (see user man-
5. Enter the voltage and current ratios in the input
5. Enter the voltage and current ratios in the input
ual and installation instructions for the device).
ual and installation instructions for the device).
fields in the "Transformer" menu in the "Config-
fields in the "Transformer" menu in the "Config-
12. Click "Connection test".
12. Click "Connection test".
uration" window.
uration" window.
INFORMATION
INFORMATION
• The GridVis® device configuration and record-
• The GridVis® device configuration and record-
ing settings describe the basic settings.
ing settings describe the basic settings.
• The program windows shown may differ from
• The program windows shown may differ from
the actual displays depending on the device or
the actual displays depending on the device or
Windows version used on your PC.
Windows version used on your PC.
• Additional functions, information and device
• Additional functions, information and device
settings specially for your device can be found
settings specially for your device can be found
in the GridVis® software's online help.
in the GridVis® software's online help.
13. If the connection test is successful, the
13. If the connection test is successful, the
6. Select the nominal frequency under the
6. Select the nominal frequency under the
"Display device information" window appears
"Display device information" window appears
"Nominal values" menu in the "Configuration"
"Nominal values" menu in the "Configuration"
with the serial number, hardware version and
with the serial number, hardware version and
window, in accordance with the existing grid
window, in accordance with the existing grid
firmware version.
firmware version.
conditions.
conditions.
14. Click "OK".
14. Click "OK".
15. Complete the "Insert new device into the proj-
15. Complete the "Insert new device into the proj-
ect" step by clicking "Finish".
ect" step by clicking "Finish".
INFORMATION
INFORMATION
To avoid data loss, save your changes to the
To avoid data loss, save your changes to the
device configuration by pressing "Transfer" or
device configuration by pressing "Transfer" or
"Transfer to"!
"Transfer to"!
6 / 6
INFORMATION
INFORMATION
The program windows shown may differ from the
The program windows shown may differ from the
actual displays depending on the device (UMG
actual displays depending on the device (UMG
96 PA or PQ series) or the Windows version used
96 PA or PQ series) or the Windows version used
on your PC!
on your PC!
(gedrehtes Patchkabel)
(gedrehtes Patchkabel)
6
6
Werbung
