LENCO PDR-040 Bedienungsanleitung Seite 9

2.3.2. Disconnect the USB cable when charging is completed.
3. Power on the Lenco PDR-040 radio
Short press the " /MODE (01)" button to power on. It will automatically
go to your last used mode.
4. Power off/Standby the Lenco PDR-040
4.1. Press and hold the " /MODE(01) " button for 3 seconds to power off
the device when in battery mode (USB charging cable not connected)
(When the USB charging cable is connected the device will go into
standby mode and charges the internal battery)
5. Mode switching (BT/FM/DAB)
You can switch between BT/FM and DAB mode by short pressing "
/MODE(01)" when the unit is powered on
6. Select the information shown on LED display
When listening to a DAB radio station, FM radio station or you are
streaming a track from your Bluetooth device, you can change the
information that is displayed on PDR-040's display.
● DAB Radio station
When listening to a DAB radio station, short press "MENU/INFO (02) " to
toggle the information displayed on PDR-040's screen between "scrolling
text" "signal strength" "programming type" "station name" "frequency"
"signal error" "Bitrate" "Battery level" "Time" and "Data"
● FM Radio station
When listening to a FM radio station, short press "MENU/INFO (02) " to
toggle the information displayed on PDR-040's screen between "scrolling
text" "PTY" "programming type" "station name" "Stereo/mono" "Battery
level" "Time" and "Data"
● Bluetooth
When streaming a track from Bluetooth device to PDR-040, short press
"MENU/INFO (02) " to toggle the information displayed on PDR-040's
screen between "Time" and "Data"
7. System Settings
When the Lenco PDR-040 is powered on, press and hold the
"MENU/INFO (02)" button to enter the settings menu. (This works in BT,
FM and DAB mode)
Within the settings menu, turn the "Rotary button (07)" knob or press
" (03)" or "
on display, Press the "Rotary button (07)" to enter the system settings.
The selectable sub-menus of the system menu: <Sleep>, <Alarm>, <Time>,
(04)" button repeatedly to select "system" in the menu
9