LENCO PDR-040 Bedienungsanleitung Seite 20

NOTE: If there is already a DAB station stored in the preset you have
selected, the new station replaces it.
8.5.4. Direct selecting preset 1, 2, 3, 4 or 5
In DAB mode, short press one of the preset number buttons (1, 2, 3, 4, or
5) to directly access your favorite DAB station stored in the presets list.
9. How do use FM Radio
9.1. General functions
9.1.1. Switching On and Off
● Short press the " /MODE" button to select FM mode.
- Display shows: < name of a FM radio station >.
9.1.2. Adjusting the volume
● Rotate the "Rotary button (07) "to adjust the volume level.
- Display shows the volume bar
9.1.3. Speaker mute/resume volume
● In radio listening mode, short press the "Rotary button (07) "to mute
the speaker.
- Display shows: < Volume Muted > for ~2 seconds
● Short press the "Rotary button (07) "again to resume volume.
9.2. General Setting
In FM mode, Press and hold the "MENU/INFO (02) "button to open the
FM Setting menu.
9.2.1. Scan setting
You can choose whether PRD-040 automatically store a scannable FM
station or a scannable FM station with a strong signal when scanning
for an FM station. To change the FM scan setting:
● Rotate the "Rotary button (07)" or Press "
(04) "button to select <scan setting> from the menu. Press the "Rotary
button (07) " to set the scanning options.
● Rotate the "Rotary button (07) " or Press the"
button to select <strong station> or <All stations> from the menu,
Press the "Rotary button (07) " to confirm the selection.
All stations: Choose this option to change the scan setting to
automatically store all scannable FM stations.
Strong Station: Choose this option to change the scan setting to
automatically store scannable FM station with a strong signal.
(03) " or "
20
(03) " or " (04) "