Introduction; Safety Regulations - Diamond3 Radia 4050TS Bedienungsanleitung

DIAMOND 3

2. INTRODUCTION

This sawing machine is designed and
intended for the professional contractor .
The machine is equipped with a height
adjustable saw head . The movable saw-
ing table has 4 ball bearing guide rollers
for precise and easy cutting feed . Through
continuous supply of cooling water the cut-
ting quality is improved and the wear on
the saw blade is minimized . The cooling
water also absorbs the saw dust .
The quality and construction of this sawing
machine meet the highest standards . The
design is based on longevity and minimal
maintenance .

3. SAFETY REGULATIONS

1 . The sawing machine is only to be used
for sawing sandstone, concrete prod-
ucts and natural stone .
 . Only saw blades advised by the manu-
facturer should be used .
®
4050TS-4060TS
3 . Check the following before starting
sawing:
• the machine should be positioned on a
stable, flat and horizontal base,
• the saw blade must be correctly
mounted, (direction of rotation and
centered correctly)
• the condition of the saw blade,
• correct fixing of the saw cover,
• sufficient supply of clean cooling
water .
4 . During sawing the material to be cut
should not be tilted or moved .
5 . During sawing with this sawing
machine the max . sound pressure level
is exceeded .
6 . The safety label on the machine should
never be removed .
7 . Besides the above-mentioned safety
regulations the user should pay atten-
tion to the following items:
• Read the instructions for setting up and
using the machine carefully .
• Check that the power cord is correctly
connected to the power supply .
• Electrical cables may not come in con-
tact with water or spray water .
• Damaged saw blades should be
replaced immediately .
11
Because the max. sound pressure
level is exceeded during opera-
tion wearing hearing protection
is mandatory.
Sawing of calcium silicate will
expose quartz dust. For your
safety wear respiritor equipment.
GB