Herunterladen Diese Seite drucken

Werbung

M9300 Series Accessory Kits
M9300-1 / M9300-2
Installation Instructions
EN
for the technician / fitter
Manuel d'installation
FR
pour le specialiste / monteu
Installationsanleitung
DE
für die Fachkraft / Monteur
Istruzioni d'installazione per il
IT
personale specializzato
Instrucciones técnicas de
ES
instalación
2
• Mounting the kit on the Actuator • Montage du kit sur un servomoteur • Montage des Kits an den Antrieb
• Montare il kit sull'attuatore • Montar el kit en el Actuador • Monteer de kit op de servomotor • Montering av kit på ställdon
P/N 14-88360-3141 - Rev. A_Issue Date 06 2017
• This document is subject to change without notice • Ce document peut être sujet à des modifications sans préavis • Änderungen ohne Ankündigung vorbehalten
• Questo documento è soggetto a modifiche senza preavviso • Este documento está sujeto a cambios sin previo aviso • Dit document kan zonder kennisgeving worden gewijzigd
• Det här dokumentet kan ändras utan föregående meddelande • Tento dokument podléhá změnám bez předchozího upozornění
• Informacje zawarte w tym dokumencie mogą ulec zmianie bez powiadomienia • Настоящий документ может быть изменен без уведомления
Installatiehandleiding
NL
voor de vakman / monteur
Installationsguide
NL
för installatör / montör
Pokyny k instalaci pro techniky a
CZ
montéry
Instrukcja instalacji dla technika /
PL
montera
Инструкция по установке для
RU
техника / монтажника
VA9308 / VA9310
1
2
1
• Montáž sady na pohon • Montaż zestawu na siłowniku • Монтаж комплекта на привод
2
1
M9316 / M9320 / M9335
M9308 / M9310

Werbung

loading

Inhaltszusammenfassung für Johnson Controls M9300-1

  • Seite 1 M9300 Series Accessory Kits M9300-1 / M9300-2 Installation Instructions Installatiehandleiding for the technician / fitter voor de vakman / monteur Manuel d’installation Installationsguide pour le specialiste / monteu för installatör / montör Installationsanleitung Pokyny k instalaci pro techniky a für die Fachkraft / Monteur montéry...
  • Seite 2 M9300 Series Accessory Kits M9300-1 / M9300-2 • Removing the kit • Plastic pointer • Pointeur en plastique • Dépose du kit • Kunststoff Zeiger • Entfernen des Kits • Puntatore plastica • Rimuovere il kit • Plástico puntero • Retirar el kit •...
  • Seite 3: Technical Specifications

    • Shoda s požadavky norem a směrnic • Dane dotyczące zgodności • Соответствие стандартам • Johnson Controls declares that this product is in compliance with the essential requirements and other relevant provisions of the EMC Directive and Low Voltage Directive.
  • Seite 4 M9300 Series Accessory Kits M9300-140 / M9300-1K / M9300-2K / M9300-10K Installation Instructions Installatiehandleiding for the technician / fitter voor de vakman / monteur Manuel d’installation Installationsguide pour le specialiste / monteu för installatör / montör Installationsanleitung Pokyny k instalaci pro techniky a für die Fachkraft / Monteur montéry Istruzioni d’installazione per il...
  • Seite 5 M9300 Series Accessory Kits M9300-140 / M9300-1K / M9300-2K / M9300-10K • Plastic pointer • Pointeur en plastique • Kunststoff Zeiger • Puntatore plastica • Plástico puntero • Plastic wijzer • Plast pekare • Plast ukazatel • Plastikowy wskaźnik • пластик указатель •...
  • Seite 6 Johnson Controls All marks herein are the marks of their respective owners. © Copyright 2017 Johnson Controls. All rights reserved. Any unauthorized use or copying is strictly prohibited. P/N 14-88360-3141 - Rev. A_Issue Date 06 2017...

Diese Anleitung auch für:

M9300-2M9300-140M9300-1kM9300-2kM9300-10k