Beko BS207C Bedienungsanleitung Seite 29

5 Installation and adjustment
Note:
C
1. The flat end of the exhaust pipe joints must be snapped into place.
2. The pipe cannot be distorted nor has substantial turning (greater than 45 °). Keep
the ventilation of the exhaust pipe not blocked.
Fig. 5
Important notice:
C
The length of the exhaust hose shall be 280~1,500mm, and this length is based on
the specifications of the air conditioning. Do not use extension tubes or replace it
with other different hoses, or this may cause a malfunction. Exhaust host must be not
blocked; otherwise it may cause overheating.
Local air conditioner / User Manuel
Fig. 6
29 / 160 EN