Connecting The Hob To The Mains Power Supply - KKT KOLBE KFS59ED Benutzerhandbuch

Connecting the hob to the main power supply

16. Connecting the hob to the mains power supply

The power supply should be connected in compliance with the rele-
vant standard, or a single-pole circuit breaker.
The method of connection is shown below.
• If the cable is damaged or needs replacing, this should be done by
an after-sales technician using the proper tools, so as to avoid any
accidents.
• The installer must ensure that the correct electrical connection
has been made and that it complies with safety regulations.
• The cable must not be bent or compressed.
• The cable must be checked regularly and only replaced by a pro-
perly qualified person.
• The installer must to use the H05GG-F power cord.
46