Maintenance - Makita BO5040 Betriebsanleitung

2. Removing wax (Fig. 22)
Use an optional felt pad. Run the tool at low speed to
remove wax.
3. Polishing (Fig. 23)
Use an optional wool pad. Run the tool at low speed
and apply the wool pad gently to the work surface.

MAINTENANCE

CAUTION:
• Always be sure that the tool is switched off and
unplugged before attempting to perform inspection or
maintenance.
• Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by Mak-
ita Authorized Service Centers, always using Makita
replacement parts.
ACCESSORIES
CAUTION:
• These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Hook-and-loop type abrasive discs
(with pre-punched holes)
• Hook-and-loop type sponge pad
• Paper dust bag holder (For BO5041 only)
• Hook-and-loop type felt pad
• Hook-and-loop type wool pad
• Paper dust bag
7