Herunterladen Inhalt Inhalt Diese Seite drucken

Using The Appliance - Eldom perfect juicer PJ1000-AC Gebrauchsanweisung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 21
- In juicer collector (6) set: filter base (5), filter (4) and extracting
bolt(3),
- set the containers (13,14) under the spouts (7,8)
- on the juicer collector (6) put the lid (2) according with the
indicators. and turn it right (pic. 6)
- Slide the pusher into the feeding tube in the lid (2)

USING THE APPLIANCE

The appliance will only function if all parts have been properly
assembled and only than the microswitch will be unlocked.
- always operate the product on a flat, stable surface
- put the plug in the wall socket
- slice products into pieces which fit into the feeding tube that is in
the lid (2).
Only soft fruit, e.g. apples or oranges can be inserted as a whole.
The tunnel in the lid is equipped with a special blade that cuts the
inserted products, which should be lightly pressed. Inserting hard
fruit/vegetables, e.g. beetroot as a whole can damage the blade
and the gears. This damage is not covered by the warranty. If the
frozen fruit filter is in use, do not mount the filter base in the juice
collector.
- make sure the juice jug (14) has been placed under the juice spout
(8).
- make sure that pulp container (13) has been placed under the pulp
spout (7)
- switch the appliance on by turning the control knob (12)to the
position „ON"
- put prepared fruits/vegetables in the feeding tube and gently press
them down towards
the rotating bolt by means of the pusher. Do not exert too much
pressure on the pusher, as that could affect the quality of the end
result or evean blocked the appliance.
Never insert your fingers or an object into the feeding tube.
- The juice will flow directly in the juice jug (14), and the pulp will be
collectedin the pulp container (13).
- If the Extracting bolt is locked, you need to set the switch (10) to
"R" for 3 to 5 seconds. Repeat the process two to three times, then
turn off, and disassemble items of PERFECT JUICER (see CLEANING
section) to remove the blcking element.
- After you have processed all ingredients and the juice flow has
stopped, switch the appliance off and wait until the filter has
stopped rotating
- Make sure you observe the maximum time of continuous operation
of the appliance. Exceeding the time limit and failing to provide
appropriate breaks during the operation of the appliance may
cause irreparable damage to the engine.
fot.1
EN|12

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Perfect juicer pj1000ac fit

Inhaltsverzeichnis