Beissbarth ST 600 Produktbeschreibung Seite 14

en 14 | ST 600 | Checking operational reliability
5. Checking operational
reliability
5.1 Test intervals
Component
Visual inspection
Safety check
Routine test (Germany only)
5.2 Visual inspection
¶
Always perform a visual inspection on switching on
the device.
i
The functions of relevance to safety are automatically
checked by the integral electronics each time the
device is switched on.
5.3 Safety checks
Safety check for Germany
¶
The operator must check the system components of
relevance to safety at least once a year (BGV A1,
§39 para. 1 and 3).
International safety check
¶
The operator should check the system components
of relevance to safety at least once a year. Local
legislation must be heeded.
5.4 Routine test (Germany only)
Routine testing must be conducted by an authorized
service engineer as follows:
R
Prior to initial commissioning.
R
Every 2 years (repeat test).
R
Immediately (within 4 weeks) following ST 600
repair work involving the replacement of assemblies
of relevance to measurement.
!
The deadline for the next routine test must be clearly
indicated on the ST 600.
|
1 691 636 220 2014-03-31
6. Decommissioning
6.1 Temporary shutdown
In the event of lengthy periods of non-use:
¶
Secure the ST 600 with wooden chocks to pre-
vent sideways movement.
6.2 Change of location
¶
If the ST 600 is passed on, all the documentation
included in the scope of delivery must be handed over
x
together with the unit.
x
¶
The ST 600 is only ever to be transported in the
x
original or equivalent packaging.
¶
Unplug the electrical connection.
¶
Heed the notes on initial commissioning.
6.3 Disposal and scrapping
6.3.1 Substances hazardous to water
!
Oils and greases as well as refuse containing oil and
grease (e.g. filters) represent a hazard to water.
1. Substances hazardous to water must not be allowed
to enter the sewage system.
2. Substances hazardous to water must be disposed of
in accordance with the applicable regulations.
6.3.2 ST 600 and accessories
Dismantle the ST 600 and sort out and dispose
of the different materials in accordance with the appli-
cable regulations.
Beissbarth GmbH