Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
en
12 | ST 600 | Product description
3.
Product description
3.1
Intended use
Warning of possible damage or injury!
Safe operation of the ST 600 cannot be
guaranteed for applications not conforming
to the intended purpose.
¶
The ST 600 is only ever to be em-
ployed for the intended purpose.
¶
The user is not authorized to convert or
modify the ST 600.
The ST 600 is a special accessory for series BD 6xx
brake dynamometers. The ST 600 is only to be
used for checking toe-in or toe-out on double-track
vehicles.
The following also applies with regard to the intended
use:
R
Read and observe all the documents accompanying
the ST 600.
R
Ensure compliance with the technical data for the
ST 600 and all its components.
R
Always heed the safety instructions when performing
work.
R
Only operate the ST 600 in the proper manner.
R
Ensure correct working procedures when performing
all brake tests.
R
Perform maintenance work in due time.
Any application beyond the scope of these specifica-
tions does not constitute the intended purpose and
could result in serious injuries or damage. The manu-
facturer cannot accept any liability for injury or damage
arising from such usage.
3.2
List of versions
Version
ST 600 Standard
ST 600 waterproof
ST 600 + CP 610, waterproof
Tab. 1:
Versions of ST 600
|
1 691 636 220
2014-03-31
x
x
-
-
x
-
x
-
x
-
x
x
3.3
Scope of delivery
The scope of delivery of the ST 600 includes the
following components:
R
Side slip tester ST 600 incl. mounting set
R
Depending on version:
$
Precision potentiometer inc. cables
$
Resistance strain gauge sensor incl. cables
$
Compensation plate incl. mounting set
3.4
Accessories
The following components are available as accessories
for the ST 600:
Component
Edge protection frame side slip
tester
Edge protection frame side slip
tester with compensation plate
3.5
ST 600
Fig. 1:
Side slip tester ST 600
Fig. 2:
Side slip tester ST 600 with compensation plate and
edge protection frame
1 Side slip tester ST 600
2 Compensation plate CP 610
3 Edge protection frame
The ST 600 is a laterally slidable steel plate.
A precision potentiometer or resistance strain gauge
sensor measures the lateral deflection of the side slip
tester.
The purpose of the compensation plate is to compen-
sate unwanted mechanical stress in the chassis before
the side slip measurement starts. As a result the side
slip measurement is more repeatable.
Order number
1 691 632 000
935 634 052
Beissbarth GmbH
Werbung
Kapitel
Inhaltsverzeichnis
