Printer Installation; Ribbon Installation - Opal OD5+ Anleitung

2.

Printer Installation

This printer model has the following print modes:
- Thermal Transfer: When printing, ribbon must be installed to transfer the print contents onto
the media.
- Direct Thermal: When printing, no ribbon is necessary; it only requires direct thermal media.

2.1 Ribbon Installation

1. Place the printer on a
horizontal surface,
and open the top
cover by pressing
the Cover Open
Buttons on both
sides.
2. Loosen and then lift
the printing
mechanism by
pressing the locking
tenons.
Schweiz - OPAL Associates AG - Motorenstrasse 116 - CH-8620 Wetzikon - Tel.: +41(0)44 931 12 22 - Fax: +41(0)44 931 12 20 - Email: info@opal-holding.com - www.opal.ch
Deutschland - OPAL Associates GmbH - Am Vögelisberg 5 - D-78479 Reichenau - Tel.: +49(0)7534 999 56 0 - Fax: +49(0)7534 999 56 99 - Email: info@opalgmbh.de - www.opalgmbh.de
Österreich - OPAL Associates GesmbH - Donaufelderstrasse 101/2/8 - A-1210 Wien - Tel.: +43(0)1 270 03 13 - Fax: +43(0)1 270 03 15 - Email: info@opalgmbh.at - www.opalgmbh.at
Frankreich - OPAL Associates SA - Avenue des Boveresses 54 - CH-1000 Lausanne - Tel.: +41(0)21 653 95 00 - Fax: +41 (0) 21 653 95 02 - Email:info@opal-holding.com - www.opalsa.ch
Dänemark - OPAL Associates ApS -
Melskov Alle 6
Weitere Standorte: München, Hamburg, Frankfurt, Darmstadt, Bregenz, Lyon - www.opal-holding.com
- DK-6100 Haderslev - Tel.: +45 7674 1510 - Fax: +45 7589 2733 - Email: info@opalaps.dk - www.opalaps.dk
User's Manual
v.1.3
OD5+ Serie
- 8 -