Installation Ethernet Module - Opal OD5+ Anleitung

4.3 Installation Ethernet Module

1 Ethernet Cable 1.8M
2 Bracket
3 Ethernet Module
4 Module Connection Wire
5 Bracket Screw*2
6 Secure Screw*1
Note:
Please make sure that anti-
•
static precautions are adopted
during the installation.
1. Make sure the power is
off and the power cable is
unplugged. Place the
printer onto a smooth
surface and flip the whole
printer unit upside down.
2. Unscrew the screws as
indicated in figure.
3. Press the Cover Open
Button and open the top
cover.
4. Remove the middle
compartment and the top
cover.
5. Remove the Ethernet port
cover from back plate of
the printer.
Schweiz - OPAL Associates AG - Motorenstrasse 116 - CH-8620 Wetzikon - Tel.: +41(0)44 931 12 22 - Fax: +41(0)44 931 12 20 - Email: info@opal-holding.com - www.opal.ch
Deutschland - OPAL Associates GmbH - Am Vögelisberg 5 - D-78479 Reichenau - Tel.: +49(0)7534 999 56 0 - Fax: +49(0)7534 999 56 99 - Email: info@opalgmbh.de - www.opalgmbh.de
Österreich - OPAL Associates GesmbH - Donaufelderstrasse 101/2/8 - A-1210 Wien - Tel.: +43(0)1 270 03 13 - Fax: +43(0)1 270 03 15 - Email: info@opalgmbh.at - www.opalgmbh.at
Frankreich - OPAL Associates SA - Avenue des Boveresses 54 - CH-1000 Lausanne - Tel.: +41(0)21 653 95 00 - Fax: +41 (0) 21 653 95 02 - Email:info@opal-holding.com - www.opalsa.ch
Dänemark - OPAL Associates ApS -
Melskov Alle 6
Weitere Standorte: München, Hamburg, Frankfurt, Darmstadt, Bregenz, Lyon - www.opal-holding.com
1
4
1
- DK-6100 Haderslev - Tel.: +45 7674 1510 - Fax: +45 7589 2733 - Email: info@opalaps.dk - www.opalaps.dk
User's Manual
2 3
5 6
1
2
2
v.1.3
OD5+ Serie
- 25 -