Opal OD5+ Anleitung Seite 13

6. Peel off the first label,
and feed the liner
through the roller and
the Tear-off Bar.
7. Follow the direction as
shown in figure to feed
the liner across the
stripper.
8. Close the printing
mechanism and the
stripper.
9. Press the FEED key to
adjust the position of
label and complete the
installation.
Notes:
Label liner thickness is recommended to be 0.06mm ± 10% with basic weight 65g/
•
The label / paper used for stripper are suggested to be at least 25mm in height.
•
The max label width for stripper is 110mm.
•
.
Schweiz - OPAL Associates AG - Motorenstrasse 116 - CH-8620 Wetzikon - Tel.: +41(0)44 931 12 22 - Fax: +41(0)44 931 12 20 - Email: info@opal-holding.com - www.opal.ch
Deutschland - OPAL Associates GmbH - Am Vögelisberg 5 - D-78479 Reichenau - Tel.: +49(0)7534 999 56 0 - Fax: +49(0)7534 999 56 99 - Email: info@opalgmbh.de - www.opalgmbh.de
Österreich - OPAL Associates GesmbH - Donaufelderstrasse 101/2/8 - A-1210 Wien - Tel.: +43(0)1 270 03 13 - Fax: +43(0)1 270 03 15 - Email: info@opalgmbh.at - www.opalgmbh.at
Frankreich - OPAL Associates SA - Avenue des Boveresses 54 - CH-1000 Lausanne - Tel.: +41(0)21 653 95 00 - Fax: +41 (0) 21 653 95 02 - Email:info@opal-holding.com - www.opalsa.ch
Dänemark - OPAL Associates ApS -
Melskov Alle 6
Weitere Standorte: München, Hamburg, Frankfurt, Darmstadt, Bregenz, Lyon - www.opal-holding.com
- DK-6100 Haderslev - Tel.: +45 7674 1510 - Fax: +45 7589 2733 - Email: info@opalaps.dk - www.opalaps.dk
User's Manual
v.1.3
OD5+ Serie
㎡
± 6%.
- 13 -