Print Line Adjustment - Opal OD5+ Anleitung

5.4 Print Line Adjustment

To get better printing balance and quality, use the
print head adjusting gear to adjust the contacting
surface between print head and label.
1. When turning the print head adjusting gear
counter-clockwise (as arrow 1 shows), the print
head will move in the direction where arrow A
shows.
2. When turning the print head adjusting gear
clockwise (as arrow 2 shows), the print head
will move in the direction where arrow B shows.
Schweiz - OPAL Associates AG - Motorenstrasse 116 - CH-8620 Wetzikon - Tel.: +41(0)44 931 12 22 - Fax: +41(0)44 931 12 20 - Email: info@opal-holding.com - www.opal.ch
Deutschland - OPAL Associates GmbH - Am Vögelisberg 5 - D-78479 Reichenau - Tel.: +49(0)7534 999 56 0 - Fax: +49(0)7534 999 56 99 - Email: info@opalgmbh.de - www.opalgmbh.de
Österreich - OPAL Associates GesmbH - Donaufelderstrasse 101/2/8 - A-1210 Wien - Tel.: +43(0)1 270 03 13 - Fax: +43(0)1 270 03 15 - Email: info@opalgmbh.at - www.opalgmbh.at
Frankreich - OPAL Associates SA - Avenue des Boveresses 54 - CH-1000 Lausanne - Tel.: +41(0)21 653 95 00 - Fax: +41 (0) 21 653 95 02 - Email:info@opal-holding.com - www.opalsa.ch
Dänemark - OPAL Associates ApS -
Melskov Alle 6
Weitere Standorte: München, Hamburg, Frankfurt, Darmstadt, Bregenz, Lyon - www.opal-holding.com
- DK-6100 Haderslev - Tel.: +45 7674 1510 - Fax: +45 7589 2733 - Email: info@opalaps.dk - www.opalaps.dk
User's Manual
OD5+ Serie
A
1
2
B
v.1.3
- 30 -