Herunterladen Inhalt Inhalt Diese Seite drucken

General Information; Technical Data - Hofmann Megaplan MEGAMOUNT 551 Installation, Bedienung Und Wartung

Universelle lkw-reifenmontiergerät
Inhaltsverzeichnis

Werbung

GENERALITA'
1
Questo smontagomme è una macchina realizzata per smon-
tare e montare pneumatici di autocarri, autobus e veicoli
industriali con cerchi da 13" a 27" e diametro max.1.600 mm.
Qualsiasi altro utilizzo è da ritenersi improprio e quindi irragio-
nevole e non consentito.
Prima di iniziare qualsiasi tipo di operazione è INDISPENSABILE
leggere e capire quanto riportato su queste istruzioni.
Il Costruttore non può essere ritenuta responsabile di danni cau-
sati dall'uso improprio ed irragionevole delle sue attrezzature.
CONSERVARE CON CURA QUESTO MANUALE PER OGNI
ULTERIORE CONSULTAZIONE.
CARATTERISTICHE TECNICHE
2
Motore pompa
Motore riduttore
Opera su ruote da
Diametro max. ruota
Larghezza max. ruota
Peso max. ruota
Peso (con accessori in dotazione)
Livello di press. acustica al posto di lavoro
NORME GENERALI DI SICUREZZA
3
L'uso dell'apparecchiatura è consentito solo a personale ap-
positamente addestrato ed autorizzato.
Qualsiasi manomissione o modifica dell'apparecchiatura non
preventivamente autorizzate dal costruttore sollevano quest'ul-
timo dai danni causati o riferibili agli atti suddetti.
La rimozione o manomissione dei dispositivi di sicurezza com-
porta una violazione delle norme europee.
Interventi sull'impianto elettrico, anche di
lieve entità, richiedono l'opera di
personale professionalmente qualificato.

GENERAL INFORMATION

1
This tyre changer has been specifically designed to demount
and mount truck, bus and commercial van tyres, with rims from
13" to 27" and a maximum 1.600 mm diameter.
Any other use is improper and therefore not authorized. Before
beginning any kind of work on or with this machine, carefully
read and understand the contents of these operating instruc-
tions.
The Manufacturer shall not liable for any injury to persons or
damage to things caused by improper use of this machine.
KEEP THIS MANUAL NEAR THE MACHINE AND CONSULT IT AS

TECHNICAL DATA

2
1,1 kw
Pump motor
1,3 / 1,8 kw
Gear-box motor
13" - 27"
Handles rim from
1.600 mm
Max. wheel diameter
780 mm
Max. wheel width
1500 kg
Max. wheel weight
560 kg
Weight (with standard accessories)
LpA <70 dB (A)
Acoustic pressure level (at work)
GENERAL SAFETY REGULATIONS
3
The use of this machine is reserved to specially trained and
authorized personnel.
Any unauthorized changes or modifications to the machine,
in particular to its electric system, relieve the manifacturer from
all liability.
Removing or tampering with the safety devices installed on this
Any work, however minor, on the electric
system must be done exclusively by
professionally qualified personnel.
1,1 kw
1,3 / 1,8 kw
13" - 27"
1.600 mm
780 mm
1500 kg
560 Kg
LpA <70 dB (A)


Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis