Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATING INSTRUCTIONS
Item no. 1305505 (EQW 7800) / Item no. 1369492 (EQW 7900)
Version 08/15
QUARTZ ALARM CLOCK EQW 7800 / 7900
INTENDED USE
The product is intended for displaying the clock time. It features a built-in alarm
function.
Please follow all safety instructions!
This product complies with the statutory national and European requirements.
All company names and product names are trademarks of their respective owners.
All rights reserved.
DELIVERY CONTENT
-
Quartz alarm clock
-
Operating instructions
FEATURES
-
4-stage Crescendo alarm
-
Snooze function
-
Background light
SYMBOLS AND MARKINGS
This symbol warns you about specific risks when handling, operating or
using the product.
This "arrow" symbol indicates special remarks and notes for operation.
SAFETY INSTRUCTIONS
First read the complete user manual as it contains important information
on using the product.
In case of damage caused by non-observance of these operating
instructions, the warranty gets void! We are not liable for any
consequential damage!
We
are
not
liable
for
by
improper
use
or
Such circumstances will void the warranty!
-
For safety reasons, unauthorized reconstruction and/or modifications of the
product are prohibited.
-
Do not expose the product to high temperatures, moisture, strong vibrations
and high mechanical loads.
-
It is intended for indoor use only. Do not use it outdoors. Contact with
moisture, e.g. in bathrooms, must be avoided under all circumstances.
-
Contact an expert if you have any doubts regarding the operation or safety of
this product.
-
The product is not a toy; keep it out of the reach of children. Operate the
product out of the reach of children; the product contains small part which
pose a choking hazard.
-
Do not leave packing material lie around carelessly. It poses a potential danger
if children use it as a toy.
-
Handle the product with care. Shocks, blows or even falls from low heights
may result in damage.
-
Observe all other safety instructions in each chapter of this manual.
NOTES ON (RECHARGEABLE) BATTERIES
-
Keep (rechargeable) batteries out of the reach of children.
-
Do not leave batteries lying around. There is a risk that children or pets swallow
batteries. If a battery has been swallowed, seek medical advice immediately.
-
Leaking or damaged (rechargeable) batteries can cause burns when in contact
with skin.
-
Do not short-circuit and disassemble batteries. Do not throw into fire. There is
a risk of explosion!
-
Do not recharge common batteries that are not rechargeable. There is a risk
of explosion! Only use batteries exclusively provided for this. Use a suitable
charger.
-
Please note the correct polarity (plus/+ and Minus/-) when inserting the
batteries/rechargeable batteries.
INSERTING / REPLACING THE (RECHARGEABLE)
BATTERY
-
Open the battery compartment on the back of the device.
-
Insert a type AA battery (not included) observing correct polarity. Heed
correct polarity as indicated in the battery compartment. Close the battery
compartment.
-
Replace the battery once the alarm clock starts running slower or the alarm
sound starts getting lower.
The product supports the use of rechargeable batteries. The lower operating
voltage (rechargeable battery = 1.2 V, battery = 1.5 V) and the lower capacity
will reduce the operating time though.
property
damage
or
injuries
non-observance
of
safety
instructions!
SETTING THE CLOCK
-
Carefully pull out the control knob on the back of the device as far as it goes.
-
Turn the control knob to set the clock time.
-
Carefully push the control knob back into the housing.
SETTING THE ALARM TIME
-
Use the control knob to set the desired alarm time. If necessary, press the
control knob inwards. Turn the control knob to set the alarm time.
The shortest hand indicates the alarm time. If you want the alarm to sound
at 7:30, this hand must be centered between the numbers 7 and 8.
ACTIVATING AND DEACTIVATING THE ALARM
-
Slide out the rough-surfaced switch on top of the device in an upward
direction in order to activate the alarm function. A crescendo alarm will sound
at the set alarm time. This is an alarm sound with steadily increasing volume,
allowing for a gentle wake-up.
-
Once the alarm sounds, push the switch back to its original position in order
to deactivate the alarm.
SNOOZE FUNCTION AND BACKGROUND LIGHT
Lifting the quartz alarm clock can activate the snooze function and background
light. The background light will turn off again after a few seconds.
Once the alarm sounds, lift the alarm clock. The alarm pauses and will sound again
after approx. 4 minutes.
SETUP LOCATION
Choose an even, flat and stable location for the device.
Protect valuable furniture surfaces with a suitable pad to prevent scratching.
Install the alarm clock in such a way that it cannot fall off.
MAINTENANCE AND CLEANING
caused
Apart from changing batteries, this product does not require any user maintenance.
Never disassemble the product.
Use a clean, soft and dry cloth for cleaning.
Do not use any chemical cleaning agents, as such could cause discoloration of the housing.
DISPOSAL
a) Product
Used electrical and electronic devices are recyclable and may not be
disposed of with the household waste!
Dispose of the product in accordance with applicable regulatory guidelines
at the end of its service life,
Remove any inserted (rechargeable) battery and dispose of them separately
from the product.
b) Batteries/rechargeable batteries
You as the end user are required by law (Battery Ordinance) to return all used
batteries/rechargeable batteries. Disposing of them in the household waste is
prohibited.
Contaminated (rechargeable) batteries are labelled with this symbol to
indicate that disposal in the domestic waste is forbidden.
The designations for the heavy metals involved are:
Cd = Cadmium, Hg = Mercury, Pb = Lead (name on (rechargeable) batteries,
e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to collection points in your
municipality, our stores or wherever (rechargeable) batteries are sold.
You thus fulfill your statutory obligations and contribute to the protection of the
environment.
TECHNICAL DATA
Power supply.................................................... 1.5 V/DC battery, type AA
Operational and storage conditions............ -10°C to +50°C, 10 – 90 � RH
Dimensions (W x H x D).................................. 90 x 98 x 48 mm
Weight............................................................... approx. 128 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
(www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, micro-
filming, or the capture in electronic data processing systems require the prior written approval by
the editor. Reprinting, also in part, is prohibited.
This publication represents the technical status at the time of printing.
©Copyright 2015 by Conrad Electronic SE.
(not included)
V1_0815_02/LS
Werbung
