Limitations - MA lighting grandMA3 Kurzanleitung

Limitations

Temperature
Operation:
I/O Nodes: 0 °C up to 40 °C / 32 °F up to 104 °F
I/O Nodes DIN-Rail: -10 °C up to +50 °C / 14 °F up to 122 °F
Caution:
Higher temperatures can stress the cooling system of the device and destroy hardware components.
Storage / Transport: -10 °C up to +50 °C / 14 °F up to 122 °F
Humidity
Operation: 20 % up to 90 % relative humidity (no condensation)
Storage / Transport: 10 % up to 90 % relative humidity (no condensation)
Environment​
Follow all safety instructions;
Only use the device within its operating limits;
Only use the device indoors;
Air must be free of dust and any hazardous or explosive substances;
Avoid jolting;
This device is not protected against splash water. Do not use it near water;
Do not use the device in rain or moisture;
Do not place the device where it can come in contact with corrosive gases or saline air as this can cause maloperation.
14
Intended Use
Safety
Support
Transport
Limitations
Installation
Quick Start
Maintenance
Disposal
Technical Data
Conformity