Switching On The Whirltub; Switching Off The Whirltub; Air Jets; Switching On / Off - Duravit Combi-System L Bedienungsanleitung

6.1 Switching on the whirltub

NOTICE
Switch off the whirltub when finished.
> Switch on the main switch.
The display buttons light up briefly one after another from the "On/Off" button to the
"Foot jets" button.
> Activate the display by holding down the "On/Off" button.
! The whirl system can only be switched on when the water level is 5 cm above the
uppermost jet.
! Turning on the water massage also activates the heater and UV hygiene manage-
ment system.

6.2 Switching off the whirltub

> Wait until the tub is completely drained and the 2-minute drying mode is finished
(air jets are automatically activated, "Air jets" button flashes).
> Switch off the main switch.

6.3 Air jets

Switching on / off

> Press the "Air" button.
The jets are switched on/off (air massage).

Changing the massage intensity

Prerequisite: Air massage is activated.
> Press the "Air" button until it flashes.
Setting buttons are now activated and illuminated.
> Press the „-" or „+" buttons.
Intensity increases or decreases.
30