Operation; Switching On The Whirltub; Switching Off The Whirltub; Switching The Air Nozzles On / Off - Duravit Air-System Bedienungsanleitung

4. Operation

NOTICE
Disinfect the whirltub system before using it for the first time, and then after every
tenth bath, but at least once a month and after a long period of no use.

4.1 Switching on the whirltub

NOTICE
Switch off the whirltub when finished.
> Switch on the main switch.

4.2 Switching off the whirltub

NOTICE
After the water has drained, wait at least 10 minutes before switching off the whirltub
so that any remaining water drains automatically from the pipes.
> Wait until the tub has emptied completely.
> The air cleaning process starts after about 2 minutes.
> Wait until the air cleaning process is finished (about 4 mins.).
> Switch off the main switch.

4.3 Switching the air nozzles on / off

> Press the "Air" button.
Switch the air system on/off.

4.4 Starting the air cleaning process manually

Prerequisite: tub is empty
> Press the "Air" button briefly.
18