Ordering Accessories - Philips SilentStar FC9306 Bedienungsanleitung

Fit the two lugs of the ilter cover behind the ridge at the bottom
5
of the vacuum cleaner (1). Then push the ilter cover towards the
appliance (2).
Press the ilter cover home to lock it ('click').
6
Note: Make sure the ilter is properly closed.
Tip: For optimal results, replace the HEPA 13 ilter every 2 years. If you want
to minimise the impact on the environment, you can wash the HEPA 13 ilter.
To wash the HEPA 13 ilter, follow the instructions below.
Rinse the HEPA 13 ilter under a hot slow-running tap.
1
Never clean the ilter with a brush.
Carefully shake the water from the surface of the ilter. Let the ilter
2
dry completely for at least 2 hours before you put it back into the
vacuum cleaner.
Note: Cleaning does not restore the original colour of the ilter, but does restore
its iltration power.
turbo brush
To clean the roller brush inside the turbo brush, follow the steps below:
1 Insert the points of a pair of scissors into the roller brush slot.
2 Move the scissors along the roller brush to catch hairs and threads
in the scissors.
3 Cut the hairs, threads etc. that have collected around the roller
brush and pull them out.
Note: Do not detach the roller brush and the parts inside the turbo brush.

ordering accessories

For purchasing dustbags, ilters or other accessories for this appliance,
please visit www.philips.com, consult the worldwide guarantee lealet or
contact the Philips Consumer Care Centre in your country.
ordering dustbags
- Philips Classic s-bag ` synthetic dustbags are available under type
number FC8021.
Philips Clinic s-bag ` high iltration synthetic dustbags are available
-
under type number FC8022.
English
13