Philips SilentStar FC9306 Bedienungsanleitung Seite 11

3 Pull at the cardboard tag to remove the full dustbag from the holder.
, When you do this, the dustbag is sealed automatically.
, You can dispose of your full dustbag with the normal household
waste.
4 Slide the cardboard front of the new dustbag into the two grooves of
the dustbag holder as far as possible.
5 First insert the front of the dustbag holder into the vacuum cleaner
(1) and then press the back into the vacuum cleaner (2).
Note: If no dustbag has been inserted, you cannot close the cover.
6 Push the cover downwards to close it.
Motor protection ilter
To guarantee optimal performance, replace the motor protection ilter
once a year. You can dispose of your old ilter with the normal household
waste.
1 Remove the dustbag holder with the dustbag.
Press the tab at the top of the motor protection ilter holder
2
down to release it (1). Lift the ilter holder out of the dustbag
compartment (2).
Put the new ilter in the ilter holder.
3
English
11