Philips SilentStar FC9306 Bedienungsanleitung Seite 12

English
12
Fit the two lugs of the ilter holder behind the ridge at the bottom
4
to ensure that it its properly at the top (1). Then press the ilter
holder home ('click') (2).
5 Place the dustbag holder with the dustbag back into the appliance
and close the cover.
HEPA 13 ilter
HEPA 13 ilter is able to remove 99.95% of all particles down to
0.0003mm in size from the outlet air. This not only includes normal house
dust, but also harmful microscopic vermin such as dust mites and their
excrements, which are well-known causes of respiratory allergies.
Note: To guarantee optimal dust retention and performance of the vacuum
cleaner, always replace the HEPA ilter every 2 years with an original Philips
ilter of the correct type (see chapter 'Ordering accessories'). You can dispose of
your old ilter with the normal household waste.
Replacing the HEPA 13 ilter
Press the ilter cover release button to open the ilter cover.
1
Remove the ilter cover.
2
Take out the HEPA 13 ilter.
3
Place the new ilter in the appliance.
4