Change System Light Settings; Change The Sound Level Of The Beep Tone - Miscea Remote Control Betriebsanleitung

3. Use
3.11 Change the system light settings
The lights in the head of the miscea faucet can be put into the following 3 modes: on,
pulse and off.
LIGHT
Press the «LIGHT» button. Use the «+» and «-» buttons to switch between different
light modes. To save settings, press the «SAVE» button. All colored LED lights illumi-
nate to indicate the new setting has been saved. If the «SAVE» button is not pressed
within 10 seconds of the last selection, the previously saved setting will be stored.
Position
Bar position
Light settings
CLASSIC
LIGHT
KITCHEN
3.12

Change the sound level of the beep tone

The sound level of the beep tone can be changed.
BEEP
Press the «BEEP» button. Use the «+» and «-» buttons to switch between the 9
different sound level settings. To save settings, press the «SAVE» button. All colored
LED lights illuminate to indicate the new setting has been saved. If the «SAVE» button
is not pressed within 10 seconds of the last selection, the previously saved setting will
be stored.
Position
Bar position
Beep tone
CLASSIC
LIGHT
KITCHEN
1 2 3
Min
OFF
1 2 3
Min
OFF VOL 1 VOL 2
17
4 5 6
PULSE
Ä
Ä
Ä
4 5 6
VOL 3 VOL 4 VOL 5
7 8 9
Max
ON
7 8 9
Max
VOL 6 VOL 7 VOL 8
Ä
Ä
Ä
V 20.01