Inhaltsverzeichnis - Miscea Remote Control Betriebsanleitung

Table of contents
1. General
1.1 About this manual
2. Description
2.1 Components
3. Use
3.1 Use of remote control
3.2 Put system in standby mode
3.3 Change dosage soap / liquid 1
3.4 Change dosage disinfectant / liquid 2
3.5 Change initial water temperature
3.6 Change water shut off delay time
3.7 Change water temperature memory time
3.8 Change duration of bucket mode
3.9 Change duration between automatic spool cycle
3.10 Change duration of automatic spool cycle
3.11 Change system light settings
3.12 Change the sound level of the beep tone
3.13 Restore factory settings
3.14 Replacing the battery
4. Public Mode
4.1 Enable / Disable the Public Mode
4.2 Change the first water cycle delay time
4.3 Change the duration of water flow in first water cycle
4.4 Change duration system is in second water cycle
5. Additional Settings
5.1 Manual Flush
5.2 Automatic Stagnation Flush at Power On
5.3 IR Sensor Sensitivity
5.4 Hand Disinfection Timer
5.5 Hand Washing Timer
5.6 Cleaning Mode
5.7 miscea System Settings for Instantaneous Water Heaters
5.8 End Point Filter Mode
6. Warranty and Information
6.1 Warranty
6.2 Warranty conditions
6.3 Contact information
6.4 Updates of the manual
11
12
12
12
12
12
12
12
13
13
14
14
15
15
16
16
17
17
18
18
18
19
19
19
20
21
21
21
22
22
23
23
24
24
26
26
26
26
26
V 20.01