Change Water Temperature Memory Time; Change Duration Of Bucket Mode - Miscea Remote Control Betriebsanleitung

3. Use
3.7

Change water temperature memory time

Water temperature memory time refers to the duration for which the most recently
used water temperature is temporarily stored in memory. For example, when the water
MEMO
temperature is altered and the water sector is activated in quick intervals, the last used
temperature will be temporarily stored in the faucet memory for an (X) amount of time.
Press the «MEMO» button. The water sector will light up. The «+» and «-» sectors on
the faucet will light up red and blue respectively. With the «+» and «-» buttons on the
remote control, the water temperature memory time can be changed. To save settings,
press the «SAVE» button. All colored LED lights illuminate to indicate the new setting
has been saved. If the «SAVE» button is not pressed within 10 seconds of the last
selection, the previously saved setting will be stored.
Position
Bar position
Water temperature memory
in seconds
CLASSIC
KITCHEN
3.8

Change duration of bucket mode

Duration of bucket mode refers to the length of time the system remains in the bucket
mode after activation. This function is not available on all miscea models.
BUCKET
Press the «BUCKET» button. The water sector will light up. With the «+» and «-»
buttons, the duration of time the system remains in bucket mode can be changed. To
save settings, press the «SAVE» button. All colored LED lights illuminate to indicate the
new setting has been saved. If the «SAVE» button is not pressed within 10 seconds of
the last selection, the previously saved setting will be stored.
Position
Bar position
Duration of bucket mode
in minutes
CLASSIC
1 2 3
Min
0 5 10
Ä
Ä
1 2 3
Min
0.5 1 1.5
15
4 5 6
15 30 45
4 5 6
2 3 4
7 8 9
Max
60 90 120
7 8 9
Max
5 10 20
Ä
V 20.01