Installing The Refrigerator - Dometic SILENCIO HC DS301H Montage- Und Bedienungsanleitung

Installing and connecting the refrigerator
3. Check that the refrigerator is not damaged.
If you find damage on the packaging or at the refrigerator resulting from
transport, report it immediately to the transportation firm.
6.2 Instructions for installing the refrigerator
Observe the following when installing the refrigerator:
• Observe the following installation dimensions:
– DS301H: fig. e, page 8
– DS601H: fig. f, page 8
• Keep objects clear of openings in the housing or installation structure (such as
ventilation slots, etc.).
6.3

Installing the refrigerator

Observe the following to set up the refrigerator:
• Ensure that the cover for protecting the hot components of the cooling unit is
present.
• Ensure that the floor frame is in place to provide adequate air circulation.
➤ Place the refrigerator on a level surface. Use a water level to check this.
6.4 Connecting the refrigerator to the power supply
A
NOTICE!
• Connect the refrigerator to a separate circuit to prevent
malfunctioning due to problems with other electrical equipment.
Never connect the refrigerator to a single socket with other electrical
equipment by means of a multi-socket.
• UK only: The refrigerator is supplied with a plug fitted with 3 A fuse.
In case this fuse has to be to changed, a 3 A ASTA approved
(BS 1362) fuse must be used.
1. Connect the digital thermometer (see separate operating manual).
2. Connect the plug of the connection cable into the AC mains.
✔ The display turns on.
For the first two seconds the display will not show temperature values; it shows
"--.-". Then the temperature read from the sensor is shown.
16
DS301H, DS601H
EN