Declaration Of Conformity; Environmental Protection, Disposal - BTI 18V UNIMASTER Originalbetriebsanleitung

OBJ_BUCH-0000000350-001.book Page 11 Tuesday, April 16, 2019 8:39 AM
Repair and customer service.
Once per week; more often in case of frequent usage:
– Keep the contacts in the slide-on shoe clean.
– Only dry-clean electrical contacts.
– Ensure that metal chips do not enter the battery-
charger housing.
If the supply cord of this power tool is damaged, it must
be replaced by a specially prepared cord available through
the BTI customer service centre.
Products that have come into contact with asbestos may
not be sent in for repair. Dispose of products contami-
nated with asbestos according to the applicable country-
specific regulations for such disposal.
Service.
BTI Befestigungstechnik GmbH & Co. KG
Salzstraße 51
74653 Ingelfingen, GERMANY
Telefon: 0 79 40/1 41-1 41
Telefax: 0 79 40/1 41-91 41
Intenet: www.bti.de

Declaration of conformity.

We declare under our sole responsibility that this prod-
uct is in conformity with the following standards or
standarisation documents:
EN 60335-1:2012
EN 60335-2-29:2004 + A2:2010
EN 55014-1:2006 + A1:2009 + A2:2011
EN 55014-2:1997 + Cor.:1997 + A1:2001 + A2:2008
EN 61000-3-2:2014
EN 61000-3-3:2013 in accordance with the Directives
2011/65/EU, 2006/42/EC, 2014/30/EU.
Technical file at:
Andreas Krebs ppa. Martin Mayer-Hagelstein
Managing Director Director Marketing &
E-Commerce
BTI Befestigungstechnik GmbH & Co. KG
74653 Ingelfingen, GERMANY
Ingelfingen: 12.04.2019

Environmental protection, disposal.

Packaging, worn out battery chargers and accessories
should be sorted for environment-friendly recycling.
Dispose of batteries only when discharged.
For batteries that are not completely discharged, insulate
the terminals with tape as a protective measure against
short-circuiting.
English - 11