Beem Topclass 3 in 1 Bedienungsanleitung Seite 35

EN
Timer
NOTE
► The timer can be used for all menus
except menu 10 (baking without
kneading). The baking time can be
changed using buttons
(1:10; 1:20; 1:30).
First select the desired menu (button
‹
), the bread weight (button
and the browning level (button
Example: The following setting was
selected:
Menu 1, bread weight
browning level
The baking time on the display is 3:25.
Use buttons
‹
the desired delay time. Each press
of the button changes the displayed
time by 10 minutes. You can set a
maximum time of 15 hours (including
baking time).
Example: Each button press
changes the time on the
display: 3:25 – 3:30 – 3:40
– 3:50 – 4:00 etc. If the
bread is to be ready in 6
hours, press the
button until 6:00 appears in
the display.
BEEM - Elements of Lifestyle
and
)
).
,
.
and to set
Multi-back Topclass 3 in 1
Start the programme by pressing the
‹
button. The colon on the display
start flashing and the set time counts
down. The baking programme starts
automatically when the start of the
baking time is reached.
Example: The displayed time is 6:00,
the colon is flashing. When
3:25 is reached, the baking
programme starts automati-
cally.
After the set period of time has
‹
elapsed, the bread is finished and the
baking mould can be removed from
the appliance.
Example: After 6 hours incl. baking
programme, the bread
is finished. The display
changes to 00:00 and the
keep-warm phase starts.
You can take the bread out
of the appliance or leave
it in the appliance during
the keep-warm phase. At
the end of the keep-warm
phase, the display returns
to the original setting:
Menu 1, bread weight
browning level
,
, 3:25.
33