Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
Safety information
For your safety and
correct operation of the
appliance, read this
manual carefully before
installation and use.
Always keep these
instructions with the
appliance even if you
move or sell it. Users
must fully know the
operation and safety
features of the appliance.
The wire connection
has to be done by
specialized technician.
• The manufacturer will
not be held liable for any
damages resulting from
incorrect or improper
installation.
• The minimum safety
distance between the
cooker top and the
extractor hood is: for
electrical hob 500mm and
for gas hob 500mm.
• If the instructions for
installation for the gas hob
specify a greater distance,
this must be respected.
• Check that the mains
voltage corresponds to
that indicated on the
rating plate fixed to the
inside of the hood.
• Means for disconnection
must be incorporated
in the fixed wiring in
accordance with the wiring
rules.
• For Class I appliances,
check that the domestic
power supply guarantees
adequate earthing.
• Connect the extractor to
the exhaust flue through a
pipe of minimum diameter
120 mm. The route of the
flue must be as short as
possible.
• Do not connect the
extractor hood to exhaust
ducts carrying combustion
fumes (boilers, fireplaces,
etc.).
• If the extractor is used
in conjunction with non-
electrical appliances (e.g.
gas burning appliances),
a sufficient degree
of aeration must be
5
Werbung
Inhaltsverzeichnis
