nohrd Eau-Me Board Bedienungsanleitung Seite 17

Service / Parts: www.nohrd.com
Step 1
Remove the locking screw (B) from the Eau-Me Board (A) using the
allen key (C).
Step 2
Place the Eau-Me board (A) on the ground at an angle of 90 ° and
hold it firmly.
Step 3
Fill the Eau-Me Board (A) with 5-6.5 L tap water and then screw in the
locking screwg (B) using the Allen key (C).
For filling a funnel / hose is recommended.
Important: Only tighten the screw plug (B) by hand. Damage to the thread
should be avoided.
17