Hitachi RAD-18NH7A Bedienungsanleitung Seite 8

HEATING OPERATION
G Use the device for heating when the outdoor temperature is under 21°C.
When it is too warm (over 21°C), the heating function may not work in order to protect the device.
G In order to keep reliability of the device, please use this device above -15°C of the outdoor temperature.
(EN1) RAD-18/25/35/50NH7A
Downloaded from www.Manualslib.com
Press the FUNCTION selector so that the display indicates
1
Set the desired FAN SPEED with the
(the display indicates the setting).
2
Set the desired room temperature with the TEMPERATURE
buttons (the display indicates the setting).
3
The temperature setting and the actual room temperature may
vary somewhat depending on conditions.
Press the
START
with a beep. Press the button again to stop operation.
STOP
I As the settings are stored in memory in the remote controller, you only
have to press the
8
manuals search engine
Black
(HEAT).
(AUTO) : The fan speed is HI at first and varies
to MED automatically when the preset
temperature has been reached.
(HI) : Economical as the room will become warm
quickly.
But you may feel a chill at the beginning.
(MED) : Fan speed slow.
(LOW) : Fan speed slower.
(SILENT) : Fan speed ultra slower.
(START/STOP) button. Heating operation starts
(START/STOP) button next time.
– 8 –
(FAN SPEED) button
5/7/08, 11:33