Playing Audio From Usb Storage Devices; Listen To Fm Radio And Other Operations - auna 10026465 Handbuch

Controlling a paired device
• Once connected you can either use the controls on the audio device to begin playback, skip tracks
etc. Or you can use the control buttons on the Sound Bar & remote.
• The PLAY button (U4 or R1) when pressed will begin playback of the selected track on the audio
device. Press again to pause playback.
• To skip to the next track press the NEXT button (U5 or R4).
• To skip to the previous track press the PREV. button (U5 or R4).
• Any further operations must be done from the audio device.
Important Bluetooth Notes
• the volume output is effected by the volume level on the audio source EG: Phone or tablet, so
make sure that is set to about 80-90% ( not too loud to avoid distortion).
• The operation range of bluetooth is approximately 10 meters (30 Feet). Any obstacles in the path
between devices may reduce this range.
• Only one Bluetooth device can be paired at a time.
• Not all Bluetooth devices are compatible.
Play Audio from USB Storage Devices
Anschluss
1. Connect a USB storage device to the sound
bar.
Functions
To
Playback
Pause
Skip to the next/previous file
Play repeatedly or randomly
2. Press SOURCE button (U3 Unit or R2 Re-
mote) repeated until you see USB mode, if
not already in that mode. You will see "USB"
appear on the display. Select a file you want
to play by pressing PREVIOUS/NEXT.
Do this
Press PLAY (U4 Unit or R1 Remote).
During playback, press PAUSE.
During playback press PREVIOUS/NEXT (U5,R4)
to go to the next file or to step back to the pre-
vious file.
Press OPTION (R6 on remote) repeatedly, the
display will be changed in the following order:
repeat > repeat all > random > normal
20
20