Playing Audio Through Bluetooth - auna 10026465 Handbuch

Bass enhancement
• To increase the bass level press the BASS (B)+ button (R9)
repeatedly.
• To decrease the bass level press the BASS (B)- button (R9)
repeatedly.
• NOTE: The BASS levels range from -3 to +3.
Mute function
• Pressing the MUTE button (R10) on the remote will temporarily
silence the audio output.
• You will see 'MUTE function is active.
• Press the MUTE button again to resume the audio output.
Play Audio through Bluetooth
Before you can use the Sound Bar with your phone or other bluetooth capable device you will need to
pair the device to the Sound Bar.
Bluetooth status table
Status
Bluetooth solid (no flash)
Bluetooth flashed rapidly
Bluetooth flashes slowly
Pair the Sound Bar
• Press the SOURCE button (U3, R2) repeatedly until you see 'BT'
appear on the display.
• When selected, the 'BT' text on the display will flash rapidly
after 5 seconds while the unit tries to connect to previously
paired devices. If no devices are found the 'BT' text will still
flash but slowly to indicate it is ready for pairing a new device.
• Enable the Bluetooth function on your audio device and search
for a device in the available list.
• Select and enable pairing with the unit. If prompted for a pass-
word enter '0000'.
• If pairing is successful the Sound Bar will beep and the 'BT' text
will stop flashing.
• If the connected device goes out of range, the Sound Bar will
attempt to connect for 2 minutes. When the device comes back
into range the Sound Bar will reconnect again automatically.
• To disconnect the paired device, press and hold for 3 seconds
the (Option) button (R6) on the remote control. The „BT" text
will begin flashing slowly again.
Reason
Connected
Auto re-connecting with last paired device. If no
connection can be made inside 2 minutes, pai-
ring mode will begin.
Pairing mode
19