Important Remark; Precautions; Introduction; Installation - Ecler DVA 1-5C Bedienungsanleitung

1. IMPORTANT REMARK

We thank you for having purchased a DVA1-5c or DVA2-10c Distributor. It is VERY IMPORTANT
that you read this manual before connecting the device in order to obtain its maximum performance.
be needed so that optimum operation shall be achieved.

1.1. Precautions

The DVA1-5c and DVA2-10c must be earthed through its mains cable.
Do not expose the unit to rain or water splashes, and do not place liquid containers or
incandescent objects like candles on top of the unit.
Should any connection / disconnection task be done, always disconnect the unit from the mains
supply.

2. INTRODUCTION

setup which requires distribution of audio/video signals (VCR, cameras, etc.) to various monitors or
video projectors, ensuring minimal loss, maximal audio/video quality and a guaranteed reliability.
stereo audio outputs, with general adjustments for the video, chrominance and audio signal.
as two totally independent DVA1-5c or as a single one input - 10 outputs distribution amplifier.

3. INSTALLATION

3.1. Placement and mounting

accessory, two minirack modules (9,5'' x 44 mm) can be assembled together into one rack unit (19'').
With the PPM1 and PUM3 accessories you can rack-mount one minirack-sized module.
can therefore be mounted into standard rack cases.
quality cables and connectors in order to avoid noise and signal attenuation. Always try to place the
device as far away as possible from noise sources (dimmers, engines, etc...) and mains wires. For
the very same reason, and under any circumstance, should you ever remove the unit's metallic
cover.
4
Downloaded from www.Manualslib.com
Congratulations! You are the owner of a carefully designed and manufactured equipment.
We recommend our authorised Technical Services whenever any maintenance task should
There are no user serviceable parts inside the unit.
The DVA1-5c and DVA2-10c distribution amplifiers are a versatile accessory for every
The DVA1-5c features one video input, one stereo audio input, five video outputs and five
The DVA2-10c is in fact two DVA1-5c units stacked into one chassis and can be operated
The DVA1-5c distribution amplifier has a minirack-sized unit. However, with the PUM3
The DVA2-10c distribution amplifier has a standard rack size (19'', 1U). All these devices
As a general rule of thumb, all connections should be held as short as possible using high
manuals search engine