Connect The Speakers - Pioneer VSX-S520D Bedienungsanleitung

> Before Start > Part Names

2. Connect the Speakers

1
a
1/2˝
(12 mm)
2
a
3
a speaker cable, b subwoofer cable
> Install > Initial Setup
Connect the speakers
b
Refer to the illustration to connect the speaker system.
Twist the wires of the speaker cable tightly before inserting
into the terminals. Make correct connection between the
unit's jacks and speaker's jacks (+ to + and – to –) for each
channel. If connection is wrong, a bass sound may become
poor due to reverse phase.
Either a powered subwoofer or passive subwoofer may be
> Playback
Supplementary information | Advanced Setup | Others
a
connected. To connect a powered subwoofer, use a
subwoofer cable and connect to the SUBWOOFER PRE
OUT jack. To connect a passive subwoofer, connect to the
SPEAKERS terminals with speaker cables as shown below.
E
N
b
13