Symbols In The Document; Intended Use; Important Safety Instructions - SMA JBOX TS4-R-O 600VUL Schnelleinstieg

SMA Solar Technology AG
1.5

Symbols in the Document

Symbol Explanation
Information that is important for a specific topic or goal, but is not safety-rele-
vant
Section in which the installation and commissioning process is illustrated
graphically.
2 Safety
2.1

Intended Use

With the innovative TS4 module technology, every PV module can now be flexibly equipped with
additional functions. The TS4 module technology offers integrated power electronics with various
functions. With the TS4-R-M, the entire PV system can be monitored at the module level. The TS4-R-S
switches off and monitors the PV system at module level. The TS4-R-O optimizes the performance of
a string in partial shading or different roof orientations.
In combination with the Gateway-2 or TAP and the Cloud Connect Advanced, the TS4-R-O can
also switch off and monitor the PV system at module level.
Use this product only in accordance with the information provided in the enclosed documentation
and with the locally applicable laws, regulations, standards and directives. Any other application
may cause personal injury or property damage.
Alterations to the product, e.g. changes or modifications, are only permitted with the express written
permission of SMA Solar Technology AG. Unauthorized alterations will void guarantee and
warranty claims and in most cases terminate the operating license. SMA Solar Technology AG
shall not be held liable for any damage caused by such changes.
Any use of the product other than that described in the Intended Use section does not qualify as the
intended use.
The enclosed documentation is an integral part of this product. Keep the documentation in a
convenient place for future reference and observe all instructions contained therein.
This document does not replace and is not intended to replace any local, state, provincial, federal
or national laws, regulations or codes applicable to the installation, electrical safety and use of the
product. SMA Solar Technology AG assumes no responsibility for the compliance or non-
compliance with such laws or codes in connection with the installation of the product.
All components must remain within their permitted operating ranges and their installation
requirements at all times.
2.2

IMPORTANT SAFETY INSTRUCTIONS

Keep the manual for future reference.
Quick Reference Guide
2 Safety
TS4-SMA-IS-xx-10 5